Powered Air Purifying Respirator Kit
EPAPR Respirator, Easy Clean, Disposable Filters, Pharmaceutical, Food Safety, Painting, and Lead Battery Manufacturing Recycling, BeigeProduct DescriptionA powered air-purifying respirator (PAPR) is a type of respirator used to safeguard workers against contaminated air. PAPRs consist of a headgear......
Send Inquiry
Product Description
EPAPR Respirator, Easy Clean, Disposable Filters, Pharmaceutical, Food Safety, Painting, and Lead Battery Manufacturing Recycling, Beige
Product Description
A powered air-purifying respirator (PAPR) is a type of respirator used to safeguard workers against contaminated air. PAPRs consist of a headgear-and-fan assembly that takes ambient air contaminated with one or more type of pollutant or pathogen, actively removes (filters) a sufficient proportion of these hazards, and then delivers the clean air to the user's face or mouth and nose. They have a higher assigned protection factor than filtering facepiece respirators such as N95 masks. PAPRs are sometimes called positive-pressure masks, blower units, or just blowers.
The KL99-PAPR is a battery-powered fan that together with a filter and an approved head top, is included in the fan-assisted respiratory protective device systems. This applies particularly to work that is hard, warm or of long duration. The human interface may consist of a hood, face shield, half mask or full face mask. The fan is equipped with a filter, and the filtered air is fed through a hose to the human interface. The pressure then generated prevents surrounding pollutants from penetrating into the mask. Power blower unit provides filtered air for the widest range of industrial applications as diverse as industrial welding, agriculture and waste disposal.
Introduction
• Starting up
Long press the power button 3s to boot, enter the low-end working state
• Power off
Press the power button for 3 consecutive times to turn off, stop working, and all indicator lights are off
• Indicator light
There are 4 indicator lights in total, 3 of which are white and green indicating the power level
• Electric quantity
When the battery is fully charged, the three-digit indicator light (white) is fully illuminated, and the indicator lights are extinguished one by one as the usage time increases. When the remaining 1 white light flashes, please pay attention to charging.
• Battery charging
When charging, the first white light flashes, the first grid is long after 1 grid is filled, the second grid white light is flashing, and so on, and finally the three grid white lights are on, indicating that the battery is fully charged.
Optional Communication Mask System
This product is used as an auxiliary part of communication with the mask. This product has a unique design, which can effectively amplify the voice of the person wearing the mask, keep the communication smooth, and ensure the clear and sonorous sound quality . At the same time, it can also be used in conjunction with the intelligent digital electronic pressure gauge to display the information of the remaining amount of gas in the cylinder. The overall design of the product is exquisite, and the mask is easy to install and operate.
Technical Parameter
Technical Parameter | |
Battery | 12V/3400mAh chargeable Li-ion Battery |
Working hours at full power | >5 hours |
Charging Cycle Times | >1000 times |
Charging Cycle Times | >1000 times |
Air output gear | 125L/min |
Acoustic sound level | <50dB |
Size | 185(length) x 162(width) x 101(height) |
Weight | <850g |
Filter | With three replaceable filters |
Green LED power indicator | |
Fast lock and unlock structure | |
Automatic detection and warning of low voltage | |
Normal use after 7J energy shock | |
Heat-resistant and cold-resistant | |
It can be normally used after being stored under the concentration of 5000ppm hydrogen tetroxide steam for five hours | |
Company Information
Our Services
1.The inquiry and question will be replied within12hours
2.High quality with competitive price
3.Good after sales service
4.Accept OEM
5.One of the most professional safety equipment manufacture with a very good and trained team
FAQ
1.How about the Delivery time?
Samples will be prepared within 5 Days after 100% T/T in advance payment. QTY order will be delivered in 20days.
2.What kind of payments does jenor support?
T/T, L/C, Western Union, Paypal & Cash are accepted.
3.What's the MOQ?
Generally speaking, the MOQ is 10PCS, but we also can provide you samples for quality inspection.
4.Do you charge for the samples?
According to our company policy,we just charge the samples based on EXW price.and we will return the samples fee during the next qty order.
5.Can you produce aocording to customers' design?
Suce, we are professional manufacturer and OEM services is welcome!
